Online Categories

Rolling Chassis
Engines & Parts
Safety Equipment
Data Aquisition
Gears & Chains
Wheels & Tires
Bodywork
Seats
Steering
Hubs / Axles / Bearings
Brake Parts
Lubes / Cleaners
Apparel / Bags
Motor Accessories
Tire Gauges/ Tools

Miscellaneous






© 2006-2010
Durango Marketing, Inc.
All Rights Reserved

Alignment Tools
Model Description Price

exac-toe

exac-toe
  • Front end alignment tool for Toe-In and Camber
  • Provides an accurate, repeatable and user friendly protocol to set and maintain toe and camber

  • Includes:
    • 2 gauge blocks
    • An allen wrench
    • A level
    • New 57" 3-piece alignment bar
    • Fully illustrated instructions
    		 $155.00
    QTY:
    Exac-Toe Spindle Extenders
  • These enable you to check the toe with the front brakes and or tires on the kart.
    		•  $52.00 per set
    QTY:
    Exac-Toe 2 Camber Gauge
    •Use in conjunction with your Exac-Toe 2 to adjust Camber & Toe at the same time. Faster and more accurate.    		 Retail $149.95
    Our Price $126.95
    QTY:
    #219 Chain Alignment Tool
  • More accurate than a straight edge and the human eye
  • Aligns your chain correctly reducing wear on chains and sprockets
    		•  $29.95
    QTY:
    #428 Chain Alignment Tool
  • More accurate than a straight edge and the human eye
  • Aligns your chain correctly reducing wear on chains and sprockets
    		•  $29.95
    QTY:
    Sniper Dealers Wanted!! Call for information.
    Sniper

    The Sniper works by projecting a laser beam from one side of the kart to the other, at a visual grid system on the surface of the opposing unit. Both camber and toe readings can then be seen simultaneously either with the kart on the stand, or on the ground with wheels on the kart fully loaded. Visit www.sniper.com.au for Tutorial Video Clips.
    Model Description Price
    Sniper V2 (replaces the C2)

    Sniper V2
    (Replaces the C2)

    The ultimate front end laser alignment system. The V stands for variable spindle sizes and the 2 refers to 2 lasers. Made from a pair of high pressure die cast units, chrome plated for superior durability. The units locates onto any spindle size between 16mm-35mm via a magnetized Vee block. The increased grid size gives you the ability to measure up to 24mm total of negative camber.

    		 $357.00
    QTY:
    Sniper B2
  • The Sniper B2 is basically a taller version of the original Sniper so as to clear the karts front brake disc and caliper
  • Can be mounted on 40mm hubs or 17mm spindles.
  • Includes:
    • 1 pair of Aluminum Sniper units
    • 1 plastic extrusion stand
    • 2 polycarbonate steering center templates
    • Supplied in custom aluminum case
    		 $675.00
    QTY:



      
       :
     :
    		 Sniper V4 (Replaces B4)
  • The units locate onto any spindle size between 16mm-35mm via a magnetized Vee block.
  • The V4 Measures: Toe, Camber, Chassis twist & squareness, caster, KPI and set true steering center.Suits 40mm hubs and 17mm spindles.
  • Includes:
    • 1 pair Aluminum Sniper units with rear pointing lasers and glass level vials.
    • 2 polycarbonate caster / steering templates
    • 1 instruction manual and warranty card
    • Supplied in custom aluminum case.
    		 $1,260.00
    QTY:
    Sniper CAT
    •Chain Alignment Tool "laser"
    • Ensure correct alignment to help reduce sprocket and chain wear.
    •Fits on #219 sprockets
    •Supplied in foam package
    		 $109.00
    QTY:
    Sniper Reducing Bushes
    •Reduces from 40mm to 25mm for the new style spindles.
    •To be used in conjunction with the B2 or B4.
    		 Temporarily out of stock
    QTY:
    Home          Map          About Us
    email: sales@accelerationkarting.com
    5225 S. Valley View Blvd. Ste. 7 ~ Las Vegas, NV 89118
    PH: (702)740-5868 Fax: (702)740-4290